Drive power   2 x 3,7 kW

Maximum drive-over weight  4 t

Maximum test weight / axle  2,5 t

Test speed  5,2 km/h

Measuring range  0-8 kN

Nominal measuring range  6,0 kN

​

Minimum track width  800 mm

Maximum track width  2200 mm

Roller diameter  205 mm

Roller width  700 mm

Height difference of rear roller  25 mm

Dimensions (W/L/D)  360 / 660 / 250 mm

Attributes
MB8100 Performance Characteristics

Permissible test load for §29 StVZO 16T

Maximum drive-over load 18T

12.0kW motors

Brake rollers with plastic corundum coating

Rear test roller 50mm elevated

Operation via start/stop button

Emergency switch lockable

Up to 17 test programmes can be selected

Start-up anti-lock device

Flexible line lengths enable individual planning

Outdoor installation possible

Features

• Outstanding accuracy, stability and durability

• Nox measurement (optional)

• Temporary pause to measurement(Hold function)

• Portable(compact size, light weight)

• Extra filters and printer paper

• Compatible with chassis dynamo and engine tune-up

• Durable Performance that has passed a severe cold test at -10 ℃

• Automatic Temperature Adjustment (2~8 min)

• 6 LED Display Windows (CO, HC, CO2, O2, λ, NOX)

• Built-In Printer (KEG-500)

• Time and Date Display Option when using printer

• Suitable for professional engine tune-ups

• Suitable for professional vehicle emission gas testing shop

Features

• Semi-permanent life time guaranteed

• Rapid and accurate service system provided to realize the best service, regardless of service period

• Indication of the value in decimal point to enhance the accuracy

 Gas Leak Detector AZ-7291

DETECTS METHANE AND PROPANE GAS LEAKAGE !
SINGLE COLOR LED DISPLAY 5-LEVEL LEAK !
ALARM AND READY LED !
BATTERY LOW INDICATION !
AUTO-CALIBRATION WHILE POWERS ON !
BUILT IN EARPHONE JACK !
FEATURES MUTE FUNCTION !
QUALITY SEMI-CONDUCTOR SENSOR !
QUICK RESPONSE
HIGH SENSITIVITY !

Specifications

·Applicable standards  IEC Pub 651 Type2 , ANSI S1.4 Type 2

·Accuracy  +/- 1.5dB (ref 94dB @1KHz)

·Digital display  4 digital LCD

·Measurement Level  30dB to 130dB

·Measurement Frequency range   31.5 Hz to 8KHz

·Frequency Weight   A and C

·Time weight   Fast and Slow

·Microphone   1/2 inch Electret condenser microphone

·Measurement Level C weighting   35dB ~ 130dB

·Digital display4 digit LCD , 0.1dB resolution, updated every 0.5s

PET-1100R
Tachometer

Functions of the PET-1000R and multi-cylinder engines are supported. High capacity type that makes it possible to select seven positions for 2-stroke gasoline engines 1 to 4 cylinder, 4-stroke 1 to 6, 8 cylinder.
● Antenna wire (1m) included.
This handy type can be used without mounting.

Technical data

Measurement range above hotspot           0 - 800 mm / 10000 mm (0...8 %)
Measurement range above pitch angle     0 - 300 mm / 10000 mm (0...3 %)
Measurement range below                        0 - 700 mm / 10000 mm (0...7 %)
Measurement range left                            0 - 1000 mm / 10000 mm (0...10 %)
Measurement range right                          0 - 1000 mm / 10000 mm (0...10 %)
Light intensity                                            125000 cd
Illumination intensity                                  200 lx
Measurement distance                              100 mm - 500 mm
Adjustment track Lens centre over floor    240 mm - 1500 mm
Deviation of intensity +/-                             5 %
Deviation from an axle +/-                          5 '
Power supply                                             1/N/PE 100 V/230 V 50 Hz/60 Hz
Power supply on-board voltage                 24 V DC
Ambient temperature                                 5 °C - 40 °C
Relative humidity                                       20 % - 80 %
Dimensions total (H x W x D)                    1770 mm x 655 mm x 720 mm
Weight                                                       65 kg
Weight incl. packaging                              80 kg

·สามารถวัดค่าได้อย่างแม่นยำ

·สะดวกและง่ายในการตั้งศูนย์

·ประหยัดพื้นที่ในการติดตั้ง

·วัดค่าได้ตามความเป็นจริง

·Car manufacturer routine

·8 CCD cameras for combined toe/Camber measurement (Patent)

·Cable or radio data transfer with 433 MHz oder 2,4 GHz

·Measuring with integrated CCD infrared cameras

·Accuracy of +2 minutes for Toe and camber

·No cable, with fast radio data transmission

·Program - guided measurement of different axle

·Three point Clamps – No Run out Compensation

·Less time for Alignment

·Cable version 8 CDD-cameras homologation Mercedes.

·Additional information - on request.

·8  CCD Cameras for combined toe and camber measurement

·Radio data transfer with 433 MHz or 2,4 GHz between sensor heads and Pc Station

·8  CCD Cameras for combined toe and camber measurement

·Cable data transfer between sensor heads and Pc Station

MB-3D PROTOSTAR 9000 Mini

Black Diamond Mini Targets (BDM)

Electronically or Manually Adjustable Post

Wheeled Cabinet

German Designed SureAlignTM 4.3 Software

Total Measurement

·Simple and quick balancing

·Easyfit data arm

·Ergonomic design

·Balanced in 6 Seconds

·New Easyfix® data arm

·Laser positioning

·Internal illumination of rim

·Wheel balancing programs for CV, cars and motorcycles

·Pneumatic lift for wheel-mounting

·Automatic measuring run until

·wheel stop

·Wheel balancing programs for CV, cars and motorcycles

·Pneumatic lift for wheel-mounting

·Automatic measuring run until wheel stop

·Monitor

·Aludata arm for internal positioning for adhesive weight

·Separation of weights (invisible weights) for hiding balancing weights behind races, improving quality/aesthetics ratio.

·Optimisation of wheel imbalance reading for greater balancing accuracy.

·Series internal adhesive weight positioning by Alueasy.

·Separation of weights (invisible weights) for hiding balancing weights behind races, improving quality/aesthetics ratio.

·Optimisation of wheel imbalance reading for greater balancing accuracy

• จับกระทะด้านนอกได้ตั้้งแต่ 10-20 นิ้ว

• จับกระทะด้านในได้ตั้้งแต่ 12-23 นิ้ว

• จับล้อรถจักรยานยนต์ได้ตั้้งแต่ 15-24 นิ้ว

• รับกระทะล้อความกว้างตั้งแต่ 3-11 นิ้ว

• ถอดยางที่มีเส้นผ่านศูนย์กลางได้ถึง 1,000 มม.

• ระบบไฟฟ้า 3 เฟส 400 โวลต์ 60 เฮิรตซ์

• จับกระทะด้านนอกได้ตั้้งแต่ 10-20 นิ้ว

• จับกระทะด้านในได้ตั้้งแต่ 12-23 นิ้ว

• จับล้อรถจักรยานยนต์ได้ตั้้งแต่ 15-24 นิ้ว

• รับกระทะล้อความกว้างตั้งแต่ 3-11 นิ้ว

• ถอดยางที่มีเส้นผ่านศูนย์กลางได้ถึง 1,000 มม.

• ระบบไฟฟ้า 3 เฟส 400 โวลต์ 60 เฮิรตซ์

• Benchmark for robustness and solidity

• Easy & Speedy

• Adaptive rotation speed and torque control

• Advanced technology especially for rigid UHP or RFT tyres upto 22"

• จับกระทะด้านนอกได้ตั้งแต่ 10-28 นิ้ว

• จับกระทะด้านในได้ตั้งแต่ 13-32 นิ้ว

• รับกระทะล้อความกว้างตั้งแต่ 3-15 นิ้ว

• ถอดยางที่มีเส้นผ่านศูนย์กลางได้ถึง 1,2 00 มม.

• ระบบไฟฟ้า 3 เฟส 400 โวลต์ 50 เฮิรตซ์

• สามารถถอดล้อแม็กได้ถึง 26"

• ถอดยางแม็กกว้างได้ถึง 14"

• สามารถถอดยางชนิดพิเศษ RFTs ได้

• มีความเร็วในการถอดยาง 2 ระดับ

• With and without IT
• With and without TECNOROLLER NG
• Two drive motors
• With and without Ergo Control

• With and without IT
• With and without TECNOROLLER NG
• Two drive motors
• With and without Ergo Control

- Pole reversed by a pedal.
- Pneumatic bead breaker.
- Sliding arm with air blocking device (unique of its type).
- Self-centring device on mobile tracks.
- Two speed motor for greater operating versatility (the machine is also
available in a one speed version: AL 518).

Automatic tyre changer for 10" to 23" wheels, able to work
on 20" alloy rims without using special attachments.
Supplied with a tubeless tyre inflation device worked by a
side pedal which also carries out the function of normal
inflation.

4-jaw hydraulic mandrel
which can be picked up in
various ways.
Locks up to 26”.

Universal Tyre Changer suitable for handling truck

wheels, farm wheels, earth-moving and industrial

wheels from 14” to 56” with rims with well, tubeless

or with ring (max wheel diam. 2300mm. - max.

wheel width 910mm.). Self-centring chuck with

variable power and control devices set in one moving

unit for a safer and more practical work.

• Vibration-resistant refrigerant scale

• Automatic cleaning and release of

• non condensible gases

• Highest filling accuracy and speed

• Vibration-resistant refrigerant scale

• Automatic cleaning and release of

• non condensible gases

• Highest filling accuracy and speed

The compact electronic charger

Electronic Charger BAT 415 – full charge, full power. The BAT 415 is a compact and solidly built electronic charger for a wide variety of applications. Outstanding product features:

• 12 V / 24 V charging mode with automatic switching

• Microprocessor-controlled charge regulation suitable for all types of lead-acid battery (maintenance-free batteries, standard batteries, gel batteries and AGM batteries)

• Shorter charging times thanks to optimized charging profile

• Infinitely variable regulated battery charge current

• Starting assistance with no interference and voltage peaks

• Reverse polarity protection

• Mobile starting assistance

• Back-up mode up to 50 A

• Starting possible even with battery removed or defective

• Protection against overcharging / exhaustive discharge

• BAT 250 can be charged via 12 V car socket

• Quick, easy and reliable battery testing

• Safety conforming to all common test standards (EN / DIN / SAE / IEC / CCA)

• Multi-functional applications

• Top performance at a low cost

• Immediate display of clear signals

• Consolidated by documentation function

Easy to use - for accurate test results:

- 1-hand concept: Navigation with 5 keys

- Robust housing

- Simple menu languages

- Results presented on large LCD

The new Bosch BSL 2470 battery charger prevents the electronics of modern motor vehicles from being damaged by voltage peaks when the battery is jump-started or charged. This robust charger for professional workshop use complies with the DIN 40839 standard and allows particularly smooth starting and loading. Starter batteries can thus be charged while installed without any problems.
 

Smooth starting and charging even on vehicles with sensitive electronics.
No voltage spikes.
For 12V and 24V batteries.
Temperature compensation for effective charging which protects the battery.
For flat batteries.
Display of operating state, charge status, incorrect polarity and malfunction.
Ammeter for indicating charging current.
Infinitely adjustable charging current.
Workshop friendly design with robust mobile metal housing

สามารถดูรายละเอียดของสินค้าได้ที่ http://www.bosch.com

• 9,000-lb. maximum lifting capacity

• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493

• Freestanding design

• High-rise

• Perfect for parking, storage and service

• Runways accommodate narrow and standard vehicles

• Runways include rail-kit for optional accessories

• Electric / hydraulic power system

• The HD-9ST is your vehicle storage and service solution and the ultimate tool for the DIY’er. Available with casters, drip-trays, jack platform and more.

• 9,000-pounds lifting capacity

• Freestanding design

• ETL approved

• Perfect for PARKING, STORAGE or SERVICE

• Runways accommodate wide or narrow vehicles.

• Runways include rail kit for optional accessories.

• The HD-9-B is your vehicle storage and service solution and the ultimate tool for the DIY’er. Available with casters, drip-trays, jack platform and more.

• 9,000-pounds lifting capacity

• Freestanding design

• ETL approved

• Perfect for PARKING, STORAGE or SERVICE

• Runways accommodate wide or narrow vehicles.

• Runways include rail kit for optional accessories.

• 10,000-pound lifting capacity

• Wide or narrow configuration

• Single piece columns

• Single point safety release

• Dual hydraulic "Direct-Drive" cylinders

• Oversize 53" tall carriage for superior strength and durability

• Lift arms shown with optional foot guards

• 10,000-lb. lifting capacity

• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493

• Expandable top beam accommodates wide or narrow drive-thru configuration

• Padded overhead safety shutoff bar

• 9,000-pound lifting capacity

• Short column for low-ceiling installations

• Wide or narrow configuration

• Single-piece columns

• Single point safety release

• Drop-end arms provide a lower pad height

• 9,000-lb lifting capacity

• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.

• Adjustable width design configures for wide or narrow installation

• Direct-drive lifting system eliminates chains and pulleys

• Dual hydraulic lifting cylinders

• great Hublauf

• Operated by air-hydraulic pump

• Air supply pressure 6 - 10 bar

• Translation device on elastic rollers

• Mechanical locking device with automatic engaging and pneumatic release

• Two-hand lowering control with Totmannsystem

Designed to allow safe use and reduced servicing, these lifts have several high-quality characteristics:

Hydraulic cylinder placed inside the fixed platform.
High resistant cables and pulleys with self lubricating bushes.
Adjustable platform.
Automatic mechanical backup safety devices with pneumatic release, allowing parking position with unladen cables.
Immediate triggering safety stud devices in the event a cable slackens or fails.
Electrical system with 24V control circuit.
Wheel free jacks available as accessory.

ยกน้ำหนักได้ 24 ตัน

ยกได้สูง 1,700 มิลลิเมตร
รองรับความกว้างระหว่างล้อหน้าและล้อหลัง 3,300 - 7,600 มิลลิเมตร 
รองรับความกว้างของหน้ายางรถ 680 - 800 มิลลิเมตร
ระยะเวลายกขึ้นโดยเฉลี่ย 40 - 60 วินาที
เส้นผ่านศูนย์กลางเสารับน้ำหนัก 400 มิลลิเมตร
ความกว้าง 2,500 มิลลิเมตร
ความยาว 8,400 มิลลิเมตร
น้ำหนักโดยประมาณ 1,900 กิโลกรัม
โครงสร้างเป็นเหล็กเกรด SS400
ใช้ระบบไฮดรอลิกและระบบลม
แรงดันลมสำหรับทำงาน 8 - 10 บาร์

Characteristics

The models under 6t are fitted with polyamide wheels. These wheels will not damage garage floors, do not rust and are quiet in operation.

Optimum use and distribution of material thanks to the rear side openings and front side reinforcements. Lighter yet stronger.

The ergonomic handle with rubber grip allows for easier handling from any position.

Characteristics

The ergonomic handle with rubber grip allows for easier handling from any position.

The models under 6t are fitted with polyamide wheels. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

The ergonomic handle with rubber grip allows for easier handling from any position.

Careful design and excellent production quality thanks to the use of state-of-the-art technologies.

Characteristics

The ergonomic handle with rubber grip allows for easier handling from any position.

Careful design and excellent production quality thanks to the use of state-of-the-art technologies.

Characteristics

The ergonomic handle with rubber grip allows for easier handling from any position.

Careful design and excellent production quality thanks to the use of state-of-the-art technologies.

Characteristics

The ergonomic handle with rubber grip allows for easier handling from any position.

Careful design and excellent production quality thanks to the use of state-of-the-art technologies.

Characteristics

The ergonomic handle with rubber grip allows for easier handling from any position.

Careful design and excellent production quality thanks to the use of state-of-the-art technologies.

Characteristics

High approach speed and efficient load elevation. The operator will always be in control of the operation even if the air supply is interrupted. Self-retracting ram descent eliminates manual lowering.

Characteristics

High approach speed and efficient load elevation. The operator will always be in control of the operation even if the air supply is interrupted. Self-retracting ram descent eliminates manual lowering.

Characteristics

High approach speed and efficient load elevation. The operator will always be in control of the operation even if the air supply is interrupted. Self-retracting ram descent eliminates manual lowering.

Characteristics

Particularly useful in the replacement of differential sets, transmissions, gear boxes, engines etc.

Characteristics

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

The extendable jib, swivel castors and hook with latch allow easy access to the load and are very manoeuvrable.

 MODELO FC-10C    kg
 POSICIÓN    1  1000
 POSICIÓN    2  800
 POSICIÓN    3  700

Characteristics

The extendable jib, swivel castors and hook with latch allow easy access to the load and are very manoeuvrable.

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

The extendable jib, swivel castors and hook with latch allow easy access to the load and are very manoeuvrable.

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

The extendable jib, swivel castors and hook with latch allow easy access to the load and are very manoeuvrable.

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

The extendable jib, swivel castors and hook with latch allow easy access to the load and are very manoeuvrable.

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

The extendable jib, swivel castors and hook with latch allow easy access to the load and are very manoeuvrable.

All models are fitted with polyamide wheels and castors to facilitate manoeuvrability. These wheels will not damage garage floors, do not rust and are quiet in operation.

Characteristics

Manual support lever to reduce the lifting strain when working at maximum capacity.

Adjustable, five-position liftingarms. Each arm includes two rollers to be able to turn the twin wheels on the truck independently.

Specially designed for removal of twinand large size wheels.

·         มาตรฐานเยอรมัน

·         Made in Germany 100%

·         มั่นใจในคุณภาพที่สมบูรณ์แบบ

·         ไม่ทำให้เกิดรอยขีดข่วน

·         สำหรับรถยนต์ที่คุณรัก

Paint Booths

Air Speed
To facilitate the use of the water base products, Blowtherm has developed a new system: AIR SPEED, which increases the air velocity up to four times when compared with traditional ventilation systems.

The advantages of the system:
  -Shorter flash-off times between coats
  -Shorter curing time
  -Faster removal of volatile components before the start of the reticulation process.

Blowpower

EXTRA. The new spray booth. Blowpower, the innovative extra ordinary system.

With the latest European Regulations which enforced the use of water base paints and also the European Directive (EN13355) relating to painting and drying booths, a demand emerged for the introduction of the new Blowpower system in the Extra spray booth. The system optimises the spray booth performance in terms of energy saving, reduction in atmospheric pollution, operational speed and the quality of the finished work. These components can be adapted all together or one by one, according to the specific needs of the customer. The selection of the most advanced technologies optimizes the performance of the spray booth, offers substantial energy savings and provides exceptional results.

·ปั๊มลมแบบสกรู 10 แรงม้า

·เครื่องกำจัดไอนํ้า

·กรองอากาศ 0.01 ไมครอน

·กรองอากาศ 1 ไมครอน

·ถ่ายนํ้าอัตโนมัติ

·ถังพักลม 500 ลิตร

·ปั๊มลมแบบสกรู 10 แรงม้า

·เครื่องกำจัดไอนํ้า

·กรองอากาศ 0.01 ไมครอน

·กรองอากาศ 1 ไมครอน

·ถ่ายนํ้าอัตโนมัติ

·ถังพักลม 500 ลิตร

·ปั๊มลมแบบสกรู 10 แรงม้า

·เครื่องกำจัดไอนํ้า

·กรองอากาศ 0.01 ไมครอน

·กรองอากาศ 1 ไมครอน

·ถ่ายนํ้าอัตโนมัติ

·ถังพักลม 500 ลิตร

·ปั๊มลมแบบสกรู 20 แรงม้า

·เครื่องกำจัดไอนํ้า

·กรองอากาศ 0.01 ไมครอน

·กรองอากาศ 1 ไมครอน

·ถ่ายนํ้าอัตโนมัติ

·ถังพักลม 500 ลิตร

·ปั๊มลมแบบสกรู 30 แรงม้า

·เครื่องกำจัดไอนํ้า

·กรองอากาศ 0.01 ไมครอน

·กรองอากาศ 1 ไมครอน

·ถ่ายนํ้าอัตโนมัติ

·ถังพักลม 1,000 ลิตร

·ปั๊มลมแบบสกรู 30 แรงม้า

·เครื่องกำจัดไอนํ้า

·กรองอากาศ 0.01 ไมครอน

·กรองอากาศ 1 ไมครอน

·ถ่ายนํ้าอัตโนมัติ

·ถังพักลม 1,000 ลิตร

HR 5-8

ไฟ 2 เฟส

ขนาด 5.0 แรงม้า
ความจุตัวถัง 300 ลิตร

ไฟ 3 เฟส

ขนาด 5.5 แรงม้า
ความจุตัวถัง 300 ลิตร

HR 5-8

ไฟ 2 เฟส

ขนาด 5.0 แรงม้า
ความจุตัวถัง 300 ลิตร

ไฟ 3 เฟส

ขนาด 5.5 แรงม้า
ความจุตัวถัง 300 ลิตร

HR 10-12

ขนาด 10 แรงม้า
ความจุตัวถัง 450 ลิตร
ระบบไฟ 3 เฟส

HR 10-12

ขนาด 10 แรงม้า
ความจุตัวถัง 450 ลิตร
ระบบไฟ 3 เฟส

·ขนาด 3 แรงม้า

·ความจุตัวถัง 260 ลิตร

·ระบบไฟเฟสเดียว

·ขนาด 10 แรงม้า

·ความจุตัวถัง 304ลิตร

·ระบบไฟ 3 เฟส

Nitrogen generator for car tyres

The nitrogen generator SNG requires only compressed air for functioning. It produces a nitrogen-enriched mixture at low costs and it allows the amortization of the device in a short time (while the cost of nitrogen cylinders is high). Nitrogen is produced autonomously when actually needed, eliminating the need for storage and handling nitrogen bottles. Nitrogen is less chemically reactive than compressed air, it has less fugacity and is less sensitive to temperature variation, and it can therefore keep the best tyre pressure for a much longer time. Tyre inflation with a nitrogen-enriched gaseous mixture enables:

·         the reduction of tyre or inner tube overheating thus avoiding of possible blasts;

·         the avoidance of oxidation and rust on the rim and of tyre cracks or loss of elasticity;

·         improvement of tyre performance, while keeping tyre pressure unchanged in time,

·         resulting therefore in a reduced consumption of tread and fuel.

เทคนิคใหม่ของการถอดใส่สปริง โช้คอัพ ระบบ SUPER STRUT & MACPERSUN STRUT ใช้งานง่ายสะดวกปลอดภัยและประหยัดเวลาสูงสุด

·         สามารถทำงานเพียงคนเดียว

·         ปลอดภัยจากอุบัติเหตุ

เพิ่มความสามารถในการทำงาน

The air-operated drainers are ideal for quick engine oil change (by means of suction) of any motor vehicle. The transparent chamber allows the quantity and quality of sucked oil to be checked immediately. Once depressurized, they work autonomously anywhere because they do not require continuous connection to the compressed-air system. The oil must be hot (70/80 C).

The combination oil suction/ drainers are suitable for draining the engine oil from any motor vehicle by gravity, (with vehicles placed on auto lift or pit) and with probe. The transparent chamber allows the quantity and quality of the sucked oil to be controlled immediately. The oil must be hot (70/80 C).

Mobile waste oil receivers - 100 l - pressure discharge.

The unit is discharged through a discharge hose pressurizing the unit at 0.5 bar (3.5 psi)
with a tyre gauge. The unit includes a safety valve, for avoiding overpressure, and a 1.5 m
discharge hose.

Air-operated grease pump, with 13 kg wheel-mounted tank. Minimum volume and extremely practical, it is always ready for use and enables easy greasing at high pressure on any motor vehicle or machinery. The seamless pressed tank offers maximum guarantee of adherence and functionality of follower plate.

PumpMaster 3 air operated pump fixed on top of a protective shield. It can be used with any type of grease keg up to 20 kg (44 lbs) placed inside the shield.

Chrome-plated device, air-operated, suitable for bleeding the hydraulic brakes and clutches of all motor vehicles. The bleeding operation can be carried out in just a few minutes by one person. The brake-bleeding device is equipped with an elastic inner membrane which hermetically separates the fluid contained in the top chamber from the air contained in an underlying chamber, thus preventing any risk of emulsion. Furthermore, it is equipped with a third high-pressure reserve air chamber (8-10 bar controlled by the bottom air regulator) enabling several bleeding operations to be carried out at a constant pressure and without requiring additional recharges. Also suitable for bleeding systems with braking control and ABS (max. at 1 bar)

Oil dispensers with hand-operated double-action pump suitable for high-viscosity (density) oils. These oil dispensers are normally used for filling or topping-up engine, gearbox, differential, etc.

Pneumatic oil dispensers suitable for filling or topping-up oil. Filled with oil (to 4/5 their capacity) and pressurized with air at 6-8 bar, they work autonomously anywhere and do not require continuous connection to the compressed-air line.

Presserized Lubricant Dispenser - 25 l.

Mobile unit for dispensing viscous lubricants, with 25 l (6.6 gallons) steel container and level gauge. The unit must be pressurized using a tyre inflator (max pressure 7 bar - 100 psi, safety valve included). Supplied with a 1.5 m delivery hose and oil control gun with flexible outlet and manual non-drip nozzle.

Hand operated lubricant dispenser with meter - 25 l.

Self contained unit with a 25 l (6.6 gallons) container with level gauge. Unit includes a lever action pump, oil meter with digital register at the pump outlet and 1.5 m delivery hose with valve and 135º angled nozzle.

ขนาด 30 40 และ 60 ตัน

An optimal cleaning of oily components such as engine parts, machining parts, plastic parts, and wooden parts can be achieved by the combination of heat, pressure and chemical. The machine can easily be paid off by itself in a very short period of time through time and labor saving. It provides the solution in cleaning of the oily and dirt contamination of components in assembly industry, especially the engine assembly.

The panel control features :

·         Timer ;

·         Heater lamp indicators ;

·         Temp control lamp indicator ;

·         Temperature control setting ;

·        Switches, Push button, for start and stop the operation.

Cleaner499

An optimal cleaning of oily components such as engine parts, machining parts, plastic parts, and wooden parts can be achieved by the combination of heat, pressure and chemical. The machine can easily be paid off by itself in a very short period of time through time and labor saving. It provides the solution in cleaning of the oily and dirt contamination of components in assembly industry, especially the engine assembly.

The panel control features :

·         Timer ;

·         Heater lamp indicators ;

·         Temp control lamp indicator ;

·         Temperature control setting ;

·        Switches, Push button, for start and stop the operation.

Cleaner499

INDRA IM-03 type is a high performance electric vulcanezer. It is easy to operate, safe and able to bear heavy work load. Its body is made of high strength metal. Heating can be made to the inner and outer surface. This is a pneumatic
equipment with automatic timeoff setting to conerolling the cured time. The operation are easy to adjusted for repairing of tread, side wall, shoulder, tubeless tires and inner tube.

Specification

Dimension: 950-230*450 mm.
Weight approx: 32 Kgs.
Air Pressure: 10-16 Bar
Temperature: 155 C
Voltage: 220-240 VAC. 50/60 Hz. (110 VAC. 60 Hz. on request)

Middle-Size Impact Wrench Suitable for tyre setting work of light & passenger vehicle and used for wide range of applications at automotive maintenance shops and tyre shops.
 

Socket Insert Sq. 12.7(1/2) mm(inch)
Tyre setting work of light car & passenger vehicle.
Disassembly/assembly work for engine or underbody.
Setting work for U-bolt

Middle-Size Impact Wrench Suitable for medium tyre setting work of light & passenger vehicle and used for wide range of applications at automotive maintenance shops and tyre shops.
 

Socket Insert Sq. 19(3/4) mm(inch)
Tyre & U-bolt setting work of light truck & 2-tons truck.
Maintenance work for engine of heavy truck.
Assembly/disassembly work of construction.

สามารถดูรายละเอียดของสินค้าได้ที่ http://www.kuken.co.jp

บล็อกลม คูเก้น KUKEN รุ่น KW-40P

ความยาวรวม (L)    304 (MM)

น้ำหนักสุทธิ  12.5 (KG)

อัตราเจาะกระแทกต่อนาที  550 I.P.M.

ขันน๊อต 1 9/16"(IN),40(MM)

ชนิดแกนเพลา  1"SQ.DR. แกนสั้น

แรงบิด  390-1,500 (N.M)

แบบด้าม  PISTOL ปืน

ระบบคลัช  SINGLE HAMMER

ความเร็วรอบตัวเปล่า  2,100 R.P.M.

ปริมาณลม  0.75 (M3 /MIN)

ขนาดสายลม  1/2"(IN),12.7 (MM)

KW-45G  
ขันน๊อต 1-3/4" (45mm)
ชนิดแกนเพลา 1" Sq.Dr
แรงบิด 1000-2450N.m
แบบด้าม ด้ามตรง
ระบบคลัช Single
ความเร็วรอบตัวเปล่า 3000 rpm
กระแทกครั้ง/นาที 600ipm
น้ำหนัก 15.3 kg
ความยาวรวม 413mm
ปริมาณลม 0.75 m3/min
ขนาดสายลม 1/2"
ลูกบล็อคติดเครื่อง เบอร์ 21x2,41x2

• Drive size : 1 in. / 25.4 mm
• Capacity bolt size : 2 in. / 50.0 mm
• Free Speed : 2,700 r.p.m.
• Recommended torque range : 370-1,630 ft-lb / 500-2,200 Nm
• Weight(w/o socket) : 37.0 lbs / 16.8 kg
• Length(w/o socket) : 24-11/16 in / 626.0 mm
• Air Comsumption : 26.5 c.f.m. / 0.75 m³(Normal)/min
• Hose size : 1/2in. / 12.7mm
• Anvil Length : 8-13/16 in. / 223.0 mm

Drive size                                    1 in.                            25.4 mm
Capacity bolt size                        2 in.                            50.0 mm
Recommended torque range      370-1,590 ft-lb            500-2,150 Nm
Weight (w/o socket)                    36.7 lbs.                     16.7 kg
Length (w/o socket)                    24-13/16 in.                 630.0 mm
Free speed                                  -                                  3,000 r.p.m.
Air consumption (Normal)          27.9 c.f.m.                    0.79 m³/min
Hose size                                  1/2 in.                           12.7 mm
Anvil length                                9-3/16 in.                      232.0 mm

1/2 " Drive Heavy Duty Air Impact Wrench

Powerful and Durable
Enhanced Twin Hammer mechanism for durability and long life.
Pressure feed lubrication system.
Maximum torque 450 ft-lbs.
Intemal power regular for control in forward and reverse.
Professional touch trigger for control of power output.
In-handle exhaust directs air away from opertor,and work area.

Motor drive unit: 115 – 230 VAC / 50 – 60 Hz / 1 Ph / 20 amp

•Max rotor thickness: 2-1/2" / 64 mm

•Max rotor diameter: 17" / 432 mm

•Brake drum diameter: 6" – 28" / 152 mm – 711 mm

•Max load with standard 1" arbor: 150 lbs. / 68 kg

•Max load with optional 1-7/8" truck arbor: 250 lbs. / 113 kg

•Spindle travel: 6-7/8" / 175 mm

•Spindle speed: 150 rpm – 200 rpm

•Shipping weight including bench and tools: 685 lbs. / 311 kg

•Shipping dimensions: 62" x 49" x 36" / 1,575 mm x 1,245 mm x 914 mm